Electrify Your Lookwith Unique Finishes

If you're looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You've never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeedElectric is durable wash after wash and maintains its bright color and brilliant finish. If you're looking to provide multi-color designs, EasyWeed Electric can be layered.

Approximate width is 14.75" EW Electric and 14.25" EW Electric Lens

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather
  
  

Laundering:

• Wait 24 hours before 1st wash
• Turn item inside out
  
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean